Survival Water Filters You Can Build Easy

Making a water filter isn’t that hard and could save your life if you are in a serious event situation. It doesn’t matter if you are stuck in the wilderness or in an urban area when tied to questionable or plain out dirty water if you are able to locate some basic supplies and even pond water.

Since the regular person can just survive about 3 days without water, it is needed to be able to convert water that could get you to sick, or even kill you into clean and safe drinking water if you are ever placed in a position where the water is unsafe to drink and you don’t have a good, quality water filtration system, like a Berkey water filter.

First you will have to have a small water bottle that is plastic or some other kind of container that you are able to pour water in at the top with a small exit opening at the lower end. This is why a plastic water bottle is perfect. You can just cut the bottom off and invert it. Next you ought to find a large green leaf from a tree. I wouldn’t use anything except that a tree leaf as some plants have toxins in them, but most trees won’t add anything harmful as it helps filter the water. This is in addition what will keep the next section of the filtration system you will need, and that is simple sand. Sand can be located just about anywhere in the world with a little searching.

Place the leaf at the small opening where the cap goes inside of the bottle, then fill the plastic bottle about ¾ of the way with sand. After this, you’ll require another leaf to assist hold the sand in place. Next is gravel. Pea sized or a little larger gravel is the next step. Fill all but about a half inch with the gravel, place an additional leaf and a larger rock on the leaf to help grasp the gravel in.

Next you will have to have something to catch the water in as it is filtered. Run about a half gallon of pond water, ditch water or any water you can see through the new filter to rinse the sediments in the gravel and sand. After you finish this, you can start catching the water in the container you want to keep the water in.

This should clean the water up nicely although it won’t be as clean as the berkey sport water filter, but it will filter the water to where it looks clean and will remove most of the debris and offer clear water. Once you filter the water, you will require to boil it for a full 12 minutes to make sure pathogens are dead. This knowledge could be a life saver in a disastrous situation, but an improved way to prepare is to make sure you have a travel berkey water filter ready so that you can just pour it in, and within a few minutes, you have clean and safe drinking water, and you can obtain it out of a ditch and still produce clean, safe water in barely minutes without the bother of finding what you should have to create a filter, and there is no requirement to boil it after filtering.

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks

Leave a Reply

Your email address will not be published. Required fields are marked *

*

*


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>