Our condenser tumble drier is making the walls in the kitchen run with condensation. Why is this?

Condenser tumble dryers do not need a vent hose and really should turn all of the water vapour in to water. But since they operate at a very high temperature, a condenser dryer will heat the actual air all-around it and the humidity in the air will condense on any kind of chilly surface, such as tiles, windows, cabinets as well as other home appliances near by, or if it is in a coolish room . If it is not a high quality clothes dryer it may well also allow some moist air from the drying process into the room as well. Really the only answer is to allow more ventilation or try to make the area warmer.

Condenser driers are usually a complex item of equipment unlike the much simpler air vented type tumble dryers which usually blow the moist air outside.

A condenser dryer has got to not just dry the clothes, but also turn the wet hot air directly into cool water too. This typically makes them less dependable, slower and much more expensive to operate.

However, the simple fact remains, that many folk have no option, but to own a condenser dryer because they have no where to hook up an external vent kit.

There are actually a couple of things that you can do that can help your condenser drier to be more effective, dry faster and reduce the moisture build-up or condensation it may leak in to the room.

1st. You could try drying smaller loads at a time.

This provides the clothes much more room to tumble in the hot air therefore they will dry more quickly and with much less creasing.

2nd . When practical put your damp washing over a clothes airer for an hour or two first ahead of putting it in your dryer. This will save considerably on drying time, operating bills and because drying time should be reduced, tumble dryer repairs are going to be much less frequent.

3rd . Thoroughly clean the lint filter each and every time you use the clothes dryer. Even a slightly stuffed filter will mean the drier needs to work much harder to circulate the warm air through the clothes. This slows the drying program, squanders electricity and can cause your drier to leak moisture into the room in your home.

4th . Virtually all condenser driers employ a heat exchanger located in them some place. It is usually quite a big metal container. It is meant to be removed regularly and rinsed thoroughly (read the owners manual for your particular product). It will come to be clogged up with damp fluff from laundry that has been dried. This heat exchanger has to be washed out at least once per month.

5th . Clean all the rubberized gaskets using a wash cloth damped in water each month. That’s all of the seals. (Around the door, round the filter and also the front as well as back of the heat exchanger assembly)

6th . Drain the water pan each and every time. The majority of condenser driers can hold a sufficient amount of water to deal with 3 loads of clothes, but in practice, that may make the water pan so overweight when it’s filled with water, you’ll spill a lot. Additionally, it means the dryer has to work a lot harder when the tray is almost full and all that additional water will only increase any moisture problems you may be having.

7th . Not all condenser driers are created equal.

I have been selling as well as offering creda tumble dryer repairs for over thirty years. In my personal experience the cheapest model never works out to end up being the cheapest option in the long run as they usually need much more routine maintenance. However nearly all high-priced models are certainly not worth the extra money either. Try to buy a type that is in the middle of the price tag range, not the most affordable, but never the most costly and do follow as much of the advice as you are able to that I have given here. It’s all based upon on my many years of experience as a drier repairman.

Article posted by Aiden Mackle of www.aidenmackle.com